Publications

Boonpasart, K.; Tracht, K. Ability-based Assistance in Adaptive Task Planning for  Human-Robot Collaboration. ICME 2026; Procedia CIRP

Lüskow, B.; Pleier, P.; Tracht, K.; Schilp J. Determining optimal decoupling strategies for medium-sized manufacturing companies using discrete event simulations. ICME 2026

Bochert, T.; Michael, J.; Tracht, K.: Experimental Study on Cleaning Mehtods for Adhesive Microstuctures. Procedia CIRP (accepted), CIRP CATS 2026 - 11th CIRP Conference on Assembly Technologies and Systems

Moazzez, K., Langstädtler, L., Schenck, C., Kuhfuss, B. (2025). Impact of Modified Clamping System on Rotary Swaging Workpiece Surface Quality and Sustainability. In: Kohl, H., Seliger, G., Dietrich, F., Mur, S. (eds) Sustainable Manufacturing as a Driver for Growth. GCSM 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-77429-4_77

Bochert, T.; Michael, J.; Tracht, K.: Experimental Study on Cleaning Mehtods for Adhesive Microstuctures. Procedia CIRP (accepted), CIRP CATS 2026 - 11th CIRP Conference on Assembly Technologies and Systems

Kolumbe, M.; Bochert, T.; Thiede, D.; Rademacher, A.; Tracht, K.: Finite element modeling of single dry-adhesive microstructures. Procedia CIRP (in print), CIRP ICME ’25 – 19th CIRP International Conference on Intelligent Computation in Manufacturing 2025. Preprint DOI: doi.org/10.26092/elib/4493

Bochert, T.; Nowotny, R.; Tracht, K.: Releasing kinematics for energy efficient gripper based on dry-adhesive microstructures. Procedia CIRP (in print), CIRP ICME ’25 – 19th CIRP International Conference on Intelligent Computation in Manufacturing 2025. Preprint DOI: doi.org/10.26092/elib/4492

Papenberg, B.; Melyooni, D.; Tracht, K.: Analyzing the tool life potential of cutting tools in comparison of expert judgements and Wear measurements using machine learning, Procedia CIRP (in print), CIRP ICME ’25 – 19th CIRP International Conference on Intelligent Computation in Manufacturing 2025

Stemmer, S., Papenberg, B., Langenhorst, L., Sölter, J., Meyer, D., Fischer, A., Tracht, K., Karpuschewski, B.: Well-informed neural network: an approach for the prediction of the width of flank wear land in turning processes, Procedia CIRP 133 (2025), pp. 84 - 89, DOI: doi.org/10.1016/j.procir.2025.02.016

Rückert, P.; Marhenke, L.; Papenberg, B., Tracht, K.: Thermography-based hand recognition through machine learning for human-robot collaboration applications, In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2025 (in print)

Langstädtler, L., Charni, D., Schenck, C., Epp, J.,Kuhfuss, B. (2024). Influences of die shape and calibration strokes on surface near residual stresses of rotary swaged steel tubes. In: Anna Carla Araujo, Arthur Cantarel, France Chabert, Adrian Korycki, Philippe Olivier, Fabrice Schmidt (eds) Materials Research Proceedings Volume 41. https://doi.or/10.21741/9781644903131

Langstädtler, L., Beckschwarte, B., Valentino, T., Radel, T. (2024). Strain rates in high velocity forming of foils. In: Anna Carla Araujo, Arthur Cantarel, France Chabert, Adrian Korycki, Philippe Olivier, Fabrice Schmidt (eds) Materials Research Proceedings Volume 41. https://doi.or/10.21741/9781644903131

Langstädtler, L., Moazzez, K., Charni, D., Schenck, C., Epp, J., Kuhfuss, B. (2025). Residual Stresses Generation in Multi-stage Rotary Swaging of Steel Tubes. In: Kohl, H., Seliger, G., Dietrich, F., Mur, S. (eds) Sustainable Manufacturing as a Driver for Growth. GCSM 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-77429-4_63

Beck, E.; Lin, H.-J-; Rückert, P.; Bao, Y.; Von Helversen, B.; Fehrler, S.; Tracht, K.; Dekorsy, A. Extending Semantic Communication towards Human Decision-Making. IEEE Access

Bochert, T.; Tracht, K.: The impact of wear, contamination and substate conditions on the pull off force of adhesive microstructures in relation to sustainable manufacturing. Procedia CIRP 138 (2026), pp. 909-914, DOI: doi.org/10.1016/j.procir.2026.01.157.

Rückert, P.; Wassermann, N.; Tracht, K.: Semantic world models for object identification and localization in mobile robotics. Procesia CIRP (in Print)

Rückert, P.; Sievers, T.; Ewers, J.; Heiner, J.; Kuschel, N.; Marhenke, L.; Wassermann, N.; Wedler, G.; Tracht, K.: Adaptive Tool Replicas with Haptic Feedback for Increased Presence Perception in Virtual Reality. Procedia CIRP, CMS 2024 - 57th CIRP Conference on Manufacturing Systems 2024. doi:10.1016/j.procir.2024.10.167

Rückert, P.; Arndt, J.; Kinder, A.; Kunkel, T.; Oja, G.; Omameh, L.; Tracht, K.: Design and Validation of a Learning Factory with Adaptive Human-Robot Collaboration. Learning Factories of the Future: Proceedings of the 14th Conference on Learning Factories 2024, Volume 1 

Beck, E.; Dekorsy, A.; Suresh, A.; Rückert, P.; Tracht, K.: Human-integrated Multi-agent Exploration using Semantic Communication and Extended Reality Simulation. IEEE, IEEE International Conference on Automation, Robotics and Applications (ICARA 2024), Vol. 10, pp. 7, Athens, Griechenland, 22. - 24. Februar 2024

Rüstmann, K.; Tracht, K.: Konzept für eine Smartphone-basierte Virtual Reality Lernumgebung, wt Werkstattstechnik online, 09 (2023), accepted

Krüger, M.; Tracht, K. Analysis of surface properties for process-reliable handling with dry-adhesive microstructures, 8. MHI Fachkolloquium 2023

Mensching, N.; Krüger, M.L.; Kvaratskheliya, A.; Meyer, D.; Tracht, K.; Okulov, I.V.; Mädler, L. Dry Adhesive Microstructures for Material Handling of Additively Manufactured and Deep Rolled Metal Surfaces with Reference to Mars. Preprints.org 2023, 2023041169. https://doi.org/10.20944/preprints202304.1169.v1 

Krüger, M.; Tracht, K.: Analysis of surface properties for process-reliable handling with dry-adhesive microstructures. In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Hrsg.: T. Schüppstuhl et al., Springer  Cham (2022).

Rückert, P.; Tamke, M.; Eisfeld, T.; Gäer, M.; Grzeschika, J.; Preuß, T.; Tracht, K.: Consideration of handedness in human-robot collaboration, CIRP ICME 2023, accepted

Rückert, P.; Götsche, A.-K.; Tracht, K.: Assembly workshops in virtual reality as an integral part of the assembly planning process. CIRP ICME 2023, accepted

Rückert, P., Tracht, K. (2023). Mutualistic Networks for Decentralized Task Allocation in Human-Robot Teams. In: Galizia, F.G., Bortolini, M. (eds) Production Processes and Product Evolution in the Age of Disruption. CARV 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. (2023) https://doi.org/10.1007/978-3-031-34821-1_87

Papenberg B., Hogreve S., Bochert T., Bornholdt C., Heinrich T., Tracht K.: Influence of illumination on the image-based classification accuracy of wear on milling tools, Procedia CIRP 126 (2024), pp. 366 - 371, DOI: https://doi.org/10.1016/j.procir.2024.08.377

Zhang, J.; Zeißig, M.; Dörfert, R.; Jablonski, F.; Kienzler, R.; Schumacher, J.; Clausen, B.; Woizeschke, P.; Vollertsen, F.: Influence of laser beam scanning pattern and polar angle on the fatigue behavior of additively manufactured specimens made of steel 316L. Materials Science and Engineering: A, In Press (2023). https://doi.org/10.1016/j.msea.2023.145651

Zeißig, M.; Jablonski, F.: Numerical investigation of production-related characteristics regarding their influence on the fatigue strength of additively manufactured components. acta mechanica et automatica - Special Issue "Modeling and experimental investigations of thermo-hydraulic, hydrogen, manufacturing and mechanical system", vol.17 no.2 (2023). https://doi.org/10.2478/ama-2023-0033

Meyer-Coors, M.; Kienzler, R.; Schneider, P.: A mathematically rigorous proof on the decoupling of the plate and disc problem.Acta Mech (2023). https://doi.org/10.1007/s00707-023-03498-2

Kracht, K.; Meyer-Coors, M.; Schröder, R.: From "How to Model a Painting" to the Digital Twin Design of Canvas Paintings.Journal of Engineering Management and Systems Engineering (2023). https://doi.org/10.56578/jemse020101

Nassef, M.; Mostafa, T.; Schenck, C.: Model Optimization of Kinematic Redundant Feed Drive Systems Using Sailfish Optimization Algorithm International Journal of Mechanical Engineering and Robotics Research Vol. 11, No. 3, March 2022, S. 187-191 http://www.ijmerr.com/index.php?m=content&c=index&a=show&catid=207&id=1714

Beckschwarte, B.; Heidhoff, J.; Langstädtler, L.; Schenck, C.; Riemer, O.; Kuhfuss, B.:  Impact of die coatings on forming conditions in electromagnetic embossing of thin sheet metal Esaform 2022, 25th International Conference on Material Forming, 27-29 April, 2022, Braga/Portugal

Beckschwarte, B.; Langstädtler, L.; Schenck, C.; Herrmann, M.; Kuhfuss, B.: Numerical and Experimental Investigation of the Impact of the Electromagnetic Properties of the Die Materials in Electromagnetic Forming of Thin Sheet Metal Impulse-Based Manufacturing Technologies, Editor V. Psyk, Journal of Manufacturing and Materials Processing, 2022, S. 127-140 ISBN 978-3-0365-2891-5; https://doi.org/10.3390/books978-3-0365-2891-5

Meiners, F.; Tuitje, C.; Hogreve, S.; Tracht, K.: Model-based prediction of the detachment of microspheres from dry-adhesive gripper surfaces by bending. Procedia CIRP 115 (2022) 101-106.
10.1016/j.procir.2022.10.057

Rückert, P.; Khabipova, A.; Tracht, K.: Development of a sustainability strategy for fuel cells using life cycle analysis and  expert interviews, CIRP GCSM 22, (in print)

Rueckert, P.; Wallmeier, H.; Tracht, K: Biofeedback for human-robot interaction in the context of collaborative assembly, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '22 Virtual Conference, 13-15 July, Procedia CIRP, Elsevier, ISSN: 2212-8271, (in print)

Sievers, T.; Ewers, J.; Heine, J.; Kuschel, N.; Marhenke, L.; Sindlinger, M.; Wassermann, N.; Tracht, K.: Soundscape Generation for Virtual Human Robot Collaboration. Procedia CIRP 107 (2022) 1005-1010.
DOI: 10.1016/j.procir.2022.05.099

Hogreve, S.; Wallmeier; H.; Tracht, K.: Evaluation of the Ergonomic Potential of Adaptive Assembly Jigs for Large-Scale Products Using Human Modelling. In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Hrsg.: T. Schüppstuhl et al., Springer  Cham (2022). (in print)

Papenberg, B.; Hogreve, S.; Tracht, K.: Experimental spaces for the introduction of disruptive technologies in production. In: 11th International Conference on Through- life Engineering Services – TESConf 2022, 8.–9.11.2022, Cranfield (2022) Paper Nr. 4264.

Papenberg, B.; Hogreve, S.; Tracht, K.: Classification of tool wear on milling tools using methods of machine learning based on visual sensor data , 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '22 Virtual Conference, 13-15 July, Procedia CIRP, Elsevier, ISSN: 2212-8271, (in print)

Zeißig, M.; Jablonski, F.: Numerical investigation of production-related characteristics regarding their influence on the fatigue strength of additively manufactured components. XXV International Symposium: Research – Education – Technology, Bremen, 30. Juni 2022, Conference Proceedings, 199-203.

Zeißig, M.; Jablonski, F.: Comparison of different approaches to model fatigue for additively manufactured specimens considering production-related characteristics. Procedia Structural Integrity, 38 (2022), 60-69. https://doi.org/10.1016/j.prostr.2022.03.007

Schreiber, P.; Hochbein, J.; Bergmann, B.; Schenck, C.; Kuhfuss, B.; Denkena, B.: Ultra Precision High Performance Axis Control In: Ultra-precision High Performance Cutting, Report of DFG Research Unit FOR 1845, Hrsg.: Brinksmeier, E.; Schönemann, L., Springer Verlag, S. 147-170 (2021) ISBN 978-3-030-83764-8; DOI: 10.1007/978-3-030-83765-5_6

Dörgeloh, T.; Parsa, N.; Schenck, C.; Riemer, O.; Brinksmeier, E.; Kuhfuss, B.: Spindle Balancing for Ultra-Precision High Speed Cutting In: Ultra-precision High Performance Cutting, Report of DFG Research Unit FOR 1845, Hrsg.: Brinksmeier, E.; Schönemann, L., Springer Verlag, S. 107-146 (2021) ISBN 978-3-030-83764-8; DOI: 10.1007/978-3-030-83765-5_5

Charni, D.; Ortmann-Ishkina, S.;Herrmann, M.; Schenck, C.; Epp, J.: Mechanical properties of rotary swaged steel components Forschung im Ingenieurwesen (2021) https://doi.org/10.1007/s10010-021-00498-3

Odening, D.;Rauschnabel, E.;Kuhfuß, B.: Werkzeugkonzept und Verfahren zum partiellen und inkrementellen Umformen durch Elektrohydroumformung Deutsches Patent- und Markenamt,AZ DE: 10 2018 008 672.1 https://register.dpma.de/DPMAregister/pat/register?AKZ=1020180086721&CURSOR=6

Heidhoff, J.; Beckschwarte, B.; Riemer, O.; Schönemann, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Electromagnetic Embossing of Optical Microstructures with High Aspect Ratios in Thin Aluminum Sheets 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=4337

Ortmann-Ishkina, S; Charni, D; Herrmann, M.; Liu, Y.;  Epp, J.; Schenck, C; Kuhfuß, B.: Development of residual stresses by infeed rotary swaging of steel tubes Archive of Applied Mechanics (2021) https://doi.org/10.1007/s00419-021-01905-5

Franceschi, A.; Stahl, J.; Kock, C.; Selbmann, R.; Ortmann-Ishkina, S.;  Jobst, A.; Merklein, M.; Kuhfuß, B.; Bergmann, M.; Behrens, B.-A.; Volk, W.;  Groche, P: Strategies for residual stress adjustment in bulk metal forming Archive of Applied Mechanics (2021) https://link.springer.com/article/10.1007/s00419-021-01903-7?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst&utm_source=ArticleAuthorOnlineFirst&utm_medium=email&utm_content=AA_en_06082018&ArticleAuthorOnlineFirst_20210226

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:  Complementary methods for assessment of residual stress fields induced by rotary swaging of steel bars 13th International Conference on the Technology of Plasticity (ICTP 2021), July 25-30, 2021, The Ohio State University, Ohio doi: 10.1007/978-3-030-75381-8_188

Beckschwarte, B.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Determination of Plastic Material Properties of Thin Metal Sheets under Electromagnetic Forming Conditions 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=850

Bösing, I.; Ortmann-Ishkina, S.; Herrmann, M; Schenck, C.; Kuhfuß, B.; Baune, M.: Control of corrosion features by forming parameters 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021, doi: 10.25518/esaform21.1464https://popups.uliege.be/esaform21/index.php?id=1464

Langstädtler, L.; Intemann, A. P.; Pegel, H.  Herrmann, M.; Schenck, C.; Kuhfuß, B.: Rapid Tooling for Impulse Forming 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=2483

Langstädtler, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Joining of Sheets and Tubes by Electrohydraulic Forming 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=867

Beckschwarte, B.; Langstädtler, L.; Schenck, C.; Herrmann, M.; Kuhfuß, B.: Numerical and Experimental Investigation of the Impact of the Electromagnetic Properties of the Die Materials in Electromagnetic Forming of Thin Sheet Metal J. Manuf. Mater. Process. 2021, 5(1), 18 https://doi.org/10.3390/jmmp50100

Langstädtler, L.; Schnabel, S.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:  Short-Term Material Characterization by Electrohydraulic Incremental Extrusion through Micro Channels Materials 2021, 14(3), 525 https://doi.org/10.3390/ma14030525

Liu, Y.; Liu, J.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:  Material Flow in Infeed Rotary Swaging of Tubes Materials 2021, 14 (1), 58 https://doi.org/10.3390/ma14010058

Papenberg, B; Hogreve, S.: Künstliche Intelligenz zum Anfassen, Industrial Production 12(2021) 47-47

Papenberg, B., Rückert, P., Tracht, K. (2022). Classification of Assembly Operations Using Recurrent Neural Networks. In: Schüppstuhl, T., Tracht, K., Raatz, A. (eds) Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Springer, Cham. https://doi.org/10.1007/978-3-030-74032-0_25

Sievers, T.; Neumann, F.; Tracht, K.: Augmented Virtuality in a Digital Learning Factory for Collaborative Robotics. Proceedings of the Conference on Learning Factories (CLF) 2021
DOI: 10.2139/ssrn.3858350

Rückert, P.; Papenberg, P.; Sievers, T.; Tracht, K.: On-site learning factories for implementing artificial intelligence systems in production. Proceedings of the Conference on Learning Factories (CLF) 2021
DOI: dx.doi.org/10.2139/ssrn.3864445

Hogreve, S.; Krist, K., Tracht, K.: Mobile, Modular and Adaptive Assembly Jigs for Large-Scale Products. In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Hrsg.: T. Schüppstuhl, K. Tracht, A. Raatz, Springer Cham (2022) 39–50.

Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate theories: A‐priori fulfillment of the local conditions by the consistent‐approximation approach. Proc. Appl. Math. Mech. 21 (1). https://doi.org/10.1002/pamm.202100136

Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Modularity of the displacement coefficients and complete plate theories in the framework of the consistent-approximation approach. Continuum Mech. Thermodyn., 33 (2021), 1805-1827. https://doi.org/10.1007/s00161-021-01009-z

Zeißig, M.; Jablonski, F.: Berücksichtigung fertigungsbedingter Eigenschaften bei der Beschreibung der Schwingfestigkeit von SLM-Proben. 53. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, online, 18. - 19. Februar 2021. https://doi.org/10.48447/Br-2021-020

Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate theories: A mixed Vekua and consistent approximation approach. Proc. Appl. Math. Mech., 20 (1). https://doi.org/10.1002/pamm.202000124

Kashtalyan, M.; Kienzler, R.; Meyer-Coors, M.: Development of the consistent second-order plate theory for transversely isotropic plates and ist analytical assessment from the three-dimensional perspective. Thin-walled Structures, 163 (2021). https://doi.org/10.1016/j.tws.2021.107704 

Heppner, E.; Glüge, R.; Weber, M.; Woschke, E.: Framework for modelling the elastoplastic behaviour of friction welded lightweight structures under tension. Proc. Appl. Math. Mech., 20. https://doi.org/10.1002/pamm.202000262

Glüge, R.; Altenbach, H.; Eisenträger, S.: Locally-synchronous, iterative solver for Fourier-based homogenization. Computational Mechanics, 68 (2021), 599-618. https://doi.org/10.1007/s00466-021-01975-w

Glüge, R.; Aßmus, M.: A systematic approach to reduce the independent tensor components by symmetry transformations - A commented translation of "Tensors and Crystal Symmetry" by Carl Hermann. Continuum Mechanics and Thermodynamics, 33 (2021), 1603-1620. https://doi.org/10.1007/s00161-021-00978-5

Nazarenko, L.; Glüge, R.; Altenbach, H.: Inverse Hooke’s law and complementary strain energy in coupled strain gradient elasticity. Zeitschrift für Angewandte Mathematik und Mechanik, 101 (9). https://doi.org/10.1002/zamm.202100005

Nazarenko, L.; Glüge, R.; Altenbach, H.: Positive definiteness in coupled strain gradient elasticity. Continuum Mech. Thermodyn, 33 (2021), 713-725, Springer, https://doi.org/10.1007/s00161-020-00949-2

Glüge, R.: Homogenisierungsmethoden: Effektive Eigenschaften von Kompositen. ISBN 9783110719482, De Gruyter STEM 2021

Herrmann, M.; Beckschwarte, B.; Hasselbruch, H.; Heidhoff, J.; Schenck, C.; Riemer, O.; Mehner, A.; Kuhfuß, B. : Diamond-Like-Carbon Coated Dies for Electromagnetic Embossing Materials 2020,13, 4939; doi:10.3390/ma13214939 https://www.mdpi.com/1996-1944/13/21/4939

Hasselbruch, H.; Herrmann, M.; Heidhoff, J. ; Böhmermann, F.; Riemer, O.; Mehner, A.; Kuhfuß, B. : Potentials of Dry Rotary Swaging Dry Metal Forming OAJ FMT 6 (2020) 192–227 https://media.suub.uni-bremen.de/bitstream/elib/4373/3/DMFOAJ_6_2020_192-227_Hasselbruch.pdf

Langstädtler, L. :  Elektromagnetisches und elektrohydraulisches Impulsumformen in der Mikroproduktion Dissertation Dr.-Ing., Universität Bremen https://doi.org/10.26092/elib/356

Bacic, I.; Rodenhauser, A. Kuhfuss, B.; Colombi Ciacchi, L. : Forschendes Lernen im Masterstudiengang Systems Engineering - Bausteine erhalten, Bausteine zusammensetzen, Ergebnisse reflektieren in Forschendes Lernen als Studiengangsprofil, Hrsg. Hoffmeister, T.; Koch, H.; Tremp, P., S. 285-300 Verlag Springer GmbH (ISBN 978-3-658-28824-2) https://doi.org/10.1007/978-3-658-28825-9

Alexe, G.; Tausendfreund, A.; Stöbener, D.; Langstädtler, L.; Herrmann, M.; Schenck, C.,  Fischer, A. : Uncertainty and resolution of speckle photography on micro samples Nanomanufacturing and Metrology volume 3,pages 91–104 (2020) https://link.springer.com/article/10.1007/s41871-020-00059-2

Stöbener, D.; Alexe, G.; Langstädtler, L.; Herrmann, M.; Schenck, C.; Fischer, A. :  An optical method to determine the strain field on micro samples during electrohydraulic formingProcedia CIRP Volume 87, 2020, Pages 438-443https://doi.org/10.1016/j.procir.2020.02.099

Herrmann, M.; Schenck, C.; Leopold, H.;  Kuhfuss, B. : Material improvement of mild Steel S355J2C by hot rotary Swaging ESAFORM 2020, 23rd International Conference on Material Forming, 4th - 6th May, 2020, Cottbus Procedia Manufacturing 47 (2020) 282–287 https://www.sciencedirect.com/science/article/pii/S2351978920312907

Ishkina, S.; Schenck, C.; Herrmann, M.; Kuhfuß, B.: Visualization of Axial Material Flow by Eccentric Thread Swaging ESAFORM 2020, 23rd International Conference on Material Forming, 4th - 6th May, 2020, Cottbus Procedia Manufacturing 47 (2020) 1339–1344 https://doi.org/10.1016/j.promfg.2020.04.255

Schönemann, L.; Berger, D.; Dörgeloh, T.; Riemer, O.; Brinksmeier, E.; Krüger R.; Schreiber, P.; Denkena, B.; Hochbein, J.; Parsa, N.; Schenck, K.; Kuhfuß, B. : Synergistic Approaches to Ultra-precision High Performance Cutting CIRP Journal of Manufacturing Science and Technology, Volume 28 (2020), 38-51 https://doi.org/10.1016/j.cirpj.2019.12.001

Sievers, T.: MRK in der Aus- und Weiterbildung - Virtuelle Schulung für die Mensch-Roboter-Kollaboration. Handling, 6(2020) 28-29.

Sievers, T.; Schmitt, B.; Petersen, M.; Tracht, K.: Integration of Collaborative Robotics in Vocational Training Using Mixed Reality. Annals of Scientific Society for Assembly, Handling and Industrial Robotics, ed.: T. Schüppstuhl; K. Tracht; D. Hinrich. Springer Vieweg, Berlin (2020) 275-283.
DOI: 10.1007/978-3-662-61755-7_25

Rückert, P.; Papenberg, B.; Tracht, K.: Classification of assembly operations using machine learning algorithms based on visual sensor data

Onken, A.-K.; Schiemenz, A.; Bader, A.; Tracht, K.: Robustness as Enabler for Sustainable Production Networks. Procedia CIRP 93 (2020) 759-764. https://doi.org/10.1016/j.procir.2020.03.059.

Meiners, F.; Tracht, K.: Releasing principles for dry-adhesive handling of microobjects. Procedia CIRP 91 (2020) 503–507. 10.1016/j.procir.2020.02.206.

Hogreve, S.; Prigge, M.; Köbisch, K. O.; Tracht, K.: Encapsulation of sensory gripper fingers with silicone rubber. Procedia CIRP 91 (2020) 439–444. 10.1016/j.procir.2020.02.196

Bader, A.; Onken, A.-K.; Tracht, K.: Planning of Structural Dynamic Production Systems with High Variation of Products, in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), Prague, Czech Republic, Jun. 2020 - Jul. 2020, 874–879. 10.1109/CoDIT49905.2020.9263801

Bader, Alexander; Onken, Ann-Kathrin; Tracht, Kirsten: Conceptual Approach of Robustness in Logistical Control. In: Nyhuis, P.; Herberger, D.; Hübner, M. (Eds.): Proceedings of the 1st Conference on Production Systems and Logistics (CPSL 2020), 2020, 353-359. DOI: https://doi.org/10.15488/9677

Bader, A; Kaufmann, J.; Tracht, K.: Order Classification in Inventory Planning of Job Shop Production. Procedia Manufacturing, 49 (2020) 180-184.

Bader, A; Kipry, N.; Lögers, F.; Tracht, K.: Algorithm for High-Throughput Scheduling of Paced Sequences. Procedia Manufacturing, 43 (2020) 223-230.

Kienzler, R.; Kashtalyan, M.: Assessment of the consistent second-order plate theory for isotropic plates from the perspective of the three-dimensional theory of elasticity. International Journal of Solids and Structures, 185–186 (2020), 257-271. https://doi.org/10.1016/j.ijsolstr.2019.08.035

Kienzler, R.; Schneider, P.: Uniform-approximation approach vs. Vekua-type approximation.Mechanics of Materials: Towards Predictive Methods for Kinetics in Plasticity, Fracture and Damage. Report No. 17/2020. Oberwolfach Reports 17 (2020), 740-741. https://doi.org/10.14760/OWR-2020-13

Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate Theories: A mixed Vekua and consistent-approximation approach. Mechanics of Materials: Towards Predictive Methods for Kinetics in Plasticity, Fracture and Damage. Report No. 13/2020, Oberwolfach Reports 14 (2020), 753-754. https://doi.org/10.14760/OWR-2020-13

Zeißig, M.; Jablonski, F.: Rechnerische Beschreibung der Schwingfestigkeit von SLM-Proben unter Berücksichtigung fertigungsbedingter Defekte. 52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, Hamburg, 18. - 19. Februar 2020

Altenbach, H.; Chinchaladze, N.; Kienzler, R.; Müller, W. H. (Eds.): Analysis of Shells, Plates, and Beams - A State of the Art Report.Advanced Structural Mechanics, 134 (2020), Springer.

Andresen, S.; Lottes, L. M.; Linnemann, S. K., Kienzler, R.: Shape adaptation of beams (1D) and plates (2D) to maximise eigenfrequencies. Advances in Mechanical Engineering, 12 (2020), 1-18. https://doi.org/10.1177/1687814020971903

Weber, M.; Glüge, R.; Altenbach, H.: Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain. Archive of Applied Materials, 91 (2021), 1371-1390, Springer. https://doi.org/10.1007/s00419-020-01827-8.

Glüge, R.; Altenbach, H.; Mahmood, N. et al.: On the Difference Between the Tensile Stiffness of Bulk and Slice Samples of Microstructured Materials. Applied Composite Materials, 27 (2020), 969-988, Springer. https://doi.org/10.1007/s10443-020-09833-3.

Schneider, P.; Kienzler, R.: Dimensioning of Thick-walled Sperical and Cylindrical Pressure Vessels. Mathematics and Mechanics of Solids, 25 (2020), 1405 - 1415. https://doi.org/10.1177/1081286517713243

Schneider, P.; Kienzler, R.: A priori estimation of the systematic error of consistently derived theories for thin structures. International Journal of Solids and Structures, 190 (2020), 1-21. https://doi.org/10.1016/j.ijsolstr.2019.10.010

Langenfeld, K.; Schowtjak, A.; Schulte, R.; Hering, O.; Möhring, K.; Clausmeyer, T.; Ostwald, R.; Walther, F.; Tekkaya, A.E.; Mosler, J.: Influence of anisotropic damage evolution on cold forging, Prod. Eng. Res. Devel., 14 (2020), 115–121. https://doi.org/10.1007/s11740-019-00942-y

Steinbacher; M.; Alexe, G.; Baune, M.; Bobrov, I.; Bösing, I.; Clausen, B.; Czotscher, T.; Epp, J.; Fischer, A.; Langstädtler, L.; Meyer, D.; Menon, S.; Riemer, O.; Sonnenberg, H.; Thomann, A.; Tönjes, A.; Vollertsen F.; Wielki, N.; Ellendt, N :  Descriptors for high throughput in structural materials development MDPI Journal: high-throughput, MDPI Journal: high-throughput, 2019, 8, 22; doi:10.3390/ht8040022,  https://www.mdpi.com/journal/highthroughput

Hasselbruch, H.; Herrmann, M.; Heidhoff, J. ; Zoch, H. W.; Kuhfuß, B.; Riemer, O.; Mehner, A.: Strukturierte und DUPLEX behandelte Werkzeuge für die Trockenbearbeitung beim Rundkneten Dry Met. Forming OAJ FMT 5 (2019) 031–038, https://www.trockenumformen.de/app/download/10203171/5_DMFOAJ_52019_Hasselbruch_IWT+Bremen_031-038.pdf

Wilhelmi, P.; Onken, A.-K.; Schenck, C.;  Kuhfuß, B.; Tracht, K. :

Linked Parts for Micro Cold Forming Process Chains Cold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfuß, B., Maaß, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 98-114, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf

Ishkina, S.; Schenck, C.; Kuhfuß, B. :Conditioning of Part PropertiesCold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfuß, B., Maaß, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 63-72, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf

Moumi, E.; Schenck, C.; Herrmann, M. Kuhfuß, B. : Rotary Swaging of Micro Parts Cold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfuß, B., Maaß, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 45-62, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf

Herrmann, M. Schmierstofffreies Rundkneten/TrockenrundknetenDissertation Dr.-Ing., Universität Bremen https://elib.suub.uni-bremen.de/edocs/00107442-1.pdf

Moumi, E.: Untersuchungen zum Rundkneten von Mikrobauteilen Dissertation Dr.-Ing., Universität Bremen http://nbn-resolving.de/urn:nbn:de:gbv:46-00107135-13

Ishkina, S.; Toenjes, A.; Schenck, C.; von Hehl, A.; Zoch, H.-W.; Kuhfuß, B : Eccentric rotary swaging variants Manufacturing Review 6, 15 (2019) https://mfr.edp-open.org/articles/mfreview/abs/2019/01/mfreview180021/mfreview180021.html

Ishkina, S.; Charni, D.; Herrmann; M.; Liu, Y.; Epp, J.; Schenck, C.; Kuhfuß, B.; Zoch, H.-W.:  Influence of process fluctuations on residual stress evolution in rotary swaging of steel tubes Materials 2019, 12, 855; doi:10.3390/ma12060855, Open Access Journal MDPI, Basel https://www.mdpi.com/1996-1944/12/6/855/pdf

Liu, Y.; Herrmann, M.;  Schenck, C.;  Kuhfuß, B.: Plastic Deformation Components in Mandrel Free Infeed Rotary Swaging of Tubes Procedia Manufacturing, Volume 27, 2019, Pages 33-38, Elsevier Verlag https://www.sciencedirect.com/science/article/pii/S2351978918313830

Langstädtler, L.; Pegel, H.; Beckschwarte, B.; Herrmann, M.; Schenck,C.; Kuhfuß, B.: Flexible tooling for impulse formingProcedia Manufacturing Volume 27, 2019, Pages 130-137, Elsevier Verlag https://doi.org/10.1016/j.promfg.2018.12.055

Krist, K.; Sievers, T.; Onken, A.; Kodjo, Y.; Tracht, K.: Application of Derivative Products for Integrating Expert Knowledge into Assembly Process Planning.
Procedia CIRP, 88 (2020) 88–93. DOI: 10.1016/j.procir.2020.05.016.

Sievers, T.; Goldenstein, C.; Tracht, K.: Material Supply Strategy for Decentralised Assembly Control in Team Assembly. Procedia CIRP, Volume 86, ed.: F. Dietrich; N. Krenkel. Elsevier (2019) 294-299. DOI: 10.1016/j.procir.2020.01.031

Sievers T.; Krist K.; Volf D.; Tracht K.: Feasibility of Mutualistic Networks for Different Types of Assembly Organization. Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, ed.: T. Schüppstuhl; K. Tracht; J. Roßmann. Springer Vieweg, Berlin (2019) 158-167. DOI: 10.1007/978-3-662-59317-2_16

Rückert, P.; Münkewarf, S.; Tracht K.: Human-in-the-loop simulation for virtual commissioning of human-robot-collaboration. ICME (2019)

Rückert, P.; Tracht, K.; Wulfsberg, J.: Elementary systems design for urban production and through life engineering services. Procedia Manufacturing (2019)

Rückert, P.; Tracht, K.; Herfs, W.; Roggendorf, R.; Schubert, V.; Schneider, M.: Consolidation of product lifecycle information within human-robot
collaboration for assembly of multi-variant products. Tesconf (2019)  (accepted for publication)

Rückert, P.; Tracht, K.; Wünsch, G.; Schwarz, P.: Virtuelle Erprobung kollaborativer Montagesysteme. In: Projektatlas Kompetenz Montage - Kollaborativ und Wandlungsfähig (2019), 76-77

Herfs, W.; Storms, S.; Roggendorf, S.; Petrovic, O.; Schubert, V.; Schneider, M.; Erkayhan, S. Rückert, P.; Tracht, K.; Heinen, K.: Produktlebenszyklusmanagement für MRK. In: Projektatlas Kompetenz Montage - Kollaborativ und Wandlungsfähig (2019), 54-57

Rückert, P; Zur Sache: Kollaborative Montage will geübt sein. handling, 3(2019), 6-7.

Onken, A.-K.; Tracht, K.: Production speed - Transportation handling. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfuß, B.; Maaß, P.; Thomy, C.; Zoch, H.-W.,  Springer Nature Switzerland AG (2020) 23.

Onken, A.-K.; Tracht, K.: Innovation speed. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfuß, B.; Maaß, P.; Thomy, C.; Zoch, H.-W.,  Springer Nature Switzerland AG (2020) 12-14.

Wilhelmi, P.; Onken, A.-K.; Schenck, C.; Kuhfuss, B.; Tracht, K.: Linked Parts for Micro Cold Forming Process Chains. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfuß, B.; Maaß, P.; Thomy, C.; Zoch, H.-W.,  Springer Nature Switzerland AG (2020) 98-114.

Meiners, F; Geppert, A.; Tracht, K.: Adhäsive Vereinzelung von Mikrokugeln - Effizientes Verfahren zum Vereinzeln und Positionieren im Hochdurchsatz. wt-online 109, 11/12 (2019) 840-844

Meiners, F.; Bader, A.; Beerepoot, J.; Tracht, K.:  Releasing Strategies for Gecko-Inspired Microgrippers. Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, Eds.: T. Schüppstuhl; K. Tracht; J. Roßmann. Springer Vieweg, Berlin (2019) 197-206.

Bader, A.; Toenjes, A.; Wielki, N.; Mändle, A.; Onken, A.-K.; Hehl, A.; Meyer, D.; Brannath, W.; Tracht, K.: Parameter Optimization in High-Throughput Testing for Structural Materials. Materials, 12, (2019)  3439.

Kienzler, R.; Schröder, R.: Einführung in die Höhere Festigkeitslehre. 2. Auflage, Springer

Kienzler, R., Schneider, P., Altenbach, Holm (Hrsg.): A beam - Just a beam in linear plane bending. Advanced Structured Materials, In: Recent Developments in the Theory of Shells, 110 (2019), 329-350, Springer. https://doi.org/10.1007/978-3-030-17747-8_18

Kienzler, R.; Schneider, P.: A Beam - Just a Beam in Linear Plane Bending. 12th HSTAM International Congress on Mechanics, Thessaloniki, 22.-25.9.2019, [Konferenzveröffentlichung]

Kienzler, R.; Schneider, P.: An A-priori Error Estimate for Consistent Plate Theories. 10th German-Greek-Polish Symposium on Recent Advances in Mechanics, Bedlewo, Polen, 15.9. - 18.9.2019, [Konferenzveröffentlichung]

Kienzler, R.; Schneider, P.: A Beam - Just a Beam in Linear Plane Bending. XLVII International Conference on Advanced Problems in Mechanics, St. Petersburg, 24. - 29. Juni 2019, [Konferenzveröffentlichung]

Schneider, P.; Kienzler, R.: Dual-energy extension of the uniform-approximation approach. Proc. Appl. Math. Mech. 19 (1), 1617-7061, https://doi.org/10.1002/pamm.201900222

Schneider, P.; Kienzler, R.: A-priori error estimation for energy based dimension-reduction techniques. 5th International Conference on Mechanics of Composites, Lissabon, 1. - 4. Juli 2019, [Konferenzveröffentlichung]

Schneider, P.; Kienzler, R.: Teaching Mechanics: Inequalities in Statically Indeterminate Static Friction Problems. Advanced Structured Materials, In: New Achievements in Continuum Mechanics and Thermodynamics, 108 (2019), 465-474, Springer. https://doi.org/10.1007/978-3-030-13307-8_31

Kienzler, R.; Fischer, F.D.; Wessel, A.: An Improved Engineering Approach to Assess Crack Arrays - an Addendum to Arch. Appl. Mech. 84 (2014) 1325-1337. Arch. Appl. Mech., 89 (2019), 731-736. https://doi.org/10.1007/s00419-018-1493-4

Schowtjak, A.; Wang, S.; Hering, O.; Clausmeyer, T.; Lohmar, J.; Schulte, R.; Ostwald, R.; Hirt, G.; Tekkaya, A. E.: Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion. Prod. Eng. Res. Devel., 14 (2019) 33–41. https://doi.org/10.1007/s11740-019-00935-x

Ostwald, R.; Kuhl, E.; Menzel, A.: On the implementation of finite deformation gradient-enhanced damage models. Computational Mechanics, 64(2019), 847–877. https://doi.org/10.1007/s00466-019-01684-5

Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber , C.; Wong, S.L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.: Friák, M.; Fujita, N.; Grilli, N.; Janssens, K.G.F.; Jia, N.; Kok, P.J.J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.: DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale. Computational Materials Science, 158 (2019), 420-478. https://doi.org/10.1016/j.commatsci.2018.04.030

Meyer-Coors, M.: Entwicklung von konsistenten Plattentheorien beliebiger Approximationsordnung. 143. Norddeutsches Mechanik-Kolloquium, Bremen, 09. Februar 2019

Ostwald, R.: Kombination von regularisierter duktiler Schädigung und Plastizität für die Simulation von Umformprozessen. 143. Norddeutsches Mechanik-Kolloquium, Bremen, 09. Februar 2019

Toenjes, A.; Ishkina, S.;  von Hehl, A.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.: Multistage Eccentric Rotary Swaging HTM J. Heat Treatm. Mat. 73 (2018) 6, pp. 344-351, DOI:10.3139/105.110372; ISSN 1867-2493, Carl Hanser Verlag GmbH & Co. KG

Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: High productivity micro rotary swaging 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15002, https://doi.org/10.1051/matecconf/201819015002

Moumi, E.; Wilhelmi; P.;Schenck, C.; Herrmann, M.; Kuhfuß, B.: Material flow control in plunge micro rotary swaging 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15014; https://doi.org/10.1051/matecconf/201819015014

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Axial and Radial Material Flow Analysis in Infedd Rotary Swaging of Tubes 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04003, https://doi.org/10.1051/matecconf/201819004003

Onken, A.-K.; Wilhelmi, P.; Tracht, K.; Kuhfuß, B.: Increased output in micro production by tolerance field widening and synchronisation 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018,  5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15006 https://doi.org/10.1051/matecconf/201819015006

Wilhelmi, P.; Schattmann, C.; Schenck, C.;  Kuhfuß, B.: Interactions between feed system and process in production of preforms as linked micro parts 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018,  5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15004 https://doi.org/10.1051/matecconf/201819015004

Langstädtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; Stöbener, D.; Westerkamp, J.F.; Fischer, A.; Kuhfuß, B.:  Electrohydraulic extrusion of sperical bronze (CuSn6) micro samples 8th International Conference on High Speed Forming (ICHSF 2018), 13-16 May 2018 Ohio/USA

Pegel, H.; Langstädtler, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Electrohydraulic sheet metal forming with flexible tools 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 12001 https://doi.org/10.1051/matecconf/201819012001

Bösing, I.; Herrmann, M.; Bobrov, I.; Thöming, J.; Kuhfuß, B.; Epp, J.; Baune, M.:  The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04002 https://doi.org/10.1051/matecconf/201819004002

Böhmermann, F.; Herrmann, M.; Riemer, O.; Kuhfuß, B.: Reducing Abrasive Particle Generation in Dry Rotary Swaging by Utilizing DLC Hard Coated Dies 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 14011 https://doi.org/10.1051/matecconf/201819014011

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.: Generation of residual stresses in rotary swaging process 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04001 https://doi.org/10.1051/matecconf/201819004001

Toenjes, A.; Ishkina, S.; Schenck, C.; von Hehl, A.; Zoch, H.-W.;  Kuhfuß, B.:  Eccentric rotary swaging variants 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15003, https://doi.org/10.1051/matecconf/201819015003

Langstädtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Electrohydraulic incremental bulk metal forming 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 03001, https://doi.org/10.1051/matecconf/201819003001

Langstädtler, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Electromagnetic Joining of Thin Sheets by Adapted Pulses Key Engineering Materials, Online: 2018-04-24, ISSN: 1662-9795, Vol. 767, pp 439-446, doi:10.4028/www.scientific.net/KEM.767.439 © 2018 Trans Tech Publications, Switzerland https://www.scientific.net/KEM.767.439.pdf

Herrmann, M.; Schenck, C.; Kuhfuß, B.: Dry Rotary Swaging with Structured and Coated Tools The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy)

Herrmann, M.; Schenck, C.; Kuhfuß, B.:  Graded Structured Tools for Dry Rotary Swagingn Dry Met. Forming OAJ FMT 4 (2018) pages 018-024

Ishkina, S.; Schenck, C.; Kuhfuß, B.: Conditioning of Material Properties by Micro Rotary Swaging The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy) Citation: AIP Conference Proceedings 1960, 160013 (2018); https://doi.org/10.1063/1.5035039 View online: https://aip.scitation.org/doi/10.1063/1.5035039 View Table of Contents: http://aip.scitation.org/toc/apc/1960/1 Published by the American Institute of Physics

Herrmann, M.; Hasselbruch, H.: Rundkneten ohne Schmierstoff Umformtechnik Massiv+Leichtbau, Ausgabe 02/2018, Meisenberg Verlag, Bamberg https://www.umformtechnikmagazin.de/umformtechnik-forschung/rundkneten-ohne-schmierstoff_34846_de/

Sievers, T.; Hogreve, S.; Tracht, K.: Decentralised dis- and reassembly control in maintenance of large-scale products. Procedia Manufacturing, Volume 16, ed.: G. M. Castelluccio. Elsevier Amsterdam (2018) 187-192. DOI: 10.1016/j.promfg.2018.10.161

Sievers, T.; Tracht, K.: Dezentrale Montagesteuerung in der Gruppenmontage. ZWF, 9 (2018) 2-5. DOI: 10.3139/104.111963

Rückert, P.; Onken, A.-K.; Tracht, K.: Langzeitspeicherung von Teileverbunden in der Mikroproduktion, Werkstattstechnik online 108/7-8 (2018), 525-529

Rückert, P; Roggendorf, S.: Arbeiten im Verbund - Kollaborative Montage variantenreicher Produkte. handling, 4 (2018), 22-23.

Rückert, P.; Adam, J.; Papenberg, P.; Paulus, H.; Tracht, K.: Calibration of a modular assembly system for personalized and adaptive human robot collaboration. In: Procedia CIRP, Volume 76 (2018), 199-204, doi.org/10.1016/j.procir.2018.01.041.

Rückert P., Meiners F., Tracht K. (2018) Augmented Reality for teaching collaborative robots based on a physical simulation. In: Schüppstuhl T., Tracht K., Franke J. (eds) Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Springer Vieweg, Berlin, Heidelberg

Onken, A.-K.; Wilhelmi, P.; Tracht, K.; Kuhfuß, B.: Increased output in micro production by tolerance field widening and synchronisation. 5th International Conference on New Forming Technology (ICNFT 2018), eds.: F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan. MATEC Web Conf. 190 15006 (2018) DOI: doi.org/10.1051/matecconf/201819015006

Tracht, K.; Onken, A.-K.; Gralla, P.; Emad, J.; Kipry, N.; Maaß, P.: Trend-specific clustering for micro mass production of linked parts. CIRP Annals 67, 1 (2018) 9-12.

Meiners, F., Tracht, K.: Clamping of Microspheres with Low Melting Metals. Proceedings of the 2nd World Congress on Micro and Nano Manufacturing (WCMNM 2018) Eds.: J. Valentinčič, M. Jun, K. Dohda, S. Dimov, Portorož (2018) 367-370

Gebert, K.; Bader, A.; Tracht K.: Decision tool for designing derivative products for supporting assembly planning of large-volume assembly groups. Procedia CIRP, 76 (2018) 31–35.
DOI: 10.1016/j.procir.2018.01.031.

Gebert, K.; Onken A.K.; Tracht K.: Assembly workshops for acquiring and integrating expert knowledge into assembly process planning using rapid prototyping model.
In: Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Eds: Schüppstuhl, T.; Tracht, K.; Franke, J., Springer Vieweg Berlin Heidelberg (2018) 13–21.
DOI: 10.1007/978-3-662-56714-2_2.

Bader, A.; Meiners, F.; Tracht, K.: Accelerating High-throughput Screening for Structural Materials with Productions Management Methods. Materials, 11, 8 (2018) 1330.

Bader, A.; Onken, A.-K.; Tracht, K.: Order Release for Temporary Paced Sequences in Flexible High Throughput Systems. Procedia CIRP, Vol. 72 (2018) 689-694.

Altenbach, H.; Jablonski, F.; Müller, W. H.; Naumenko, K.; Schneider, P. (Hrsg.): Advances in Mechanics of Materials and Structural Analysis. Advanced Structured Materials (80), Springer. https://doi.org/10.1007/978-3-319-70563-7

Bakir, A.; Hochrainer, T.;  Tushtev, K.; Rezwan, K.: Determing three dimensional failure surfaces for porous ceramics from FE simulations and mechanical testing, 21st European Workshop on Automatic Differentiation, Jena, 19. - 20. November 2018,  http://www.autodiff.org/Docs/euroad/21st EuroAd Workshop - Ahmad Bakir - Determing three dimensional failure surfaces for porous ceramics from FE simulations and mechanical testing.pdf

Schowtjak, A.; Clausmeyer, T.; Ostwald, R.: Modellintegration für die Prozesssimulation, SFB/Transregio 188 Industriekolloquium, Dortmund, 15. November 2018

Ostwald, R.; Sprave, L.; Schulte, R.; Menzel, A.: A gradient-enhanced damage implementation for the simulation of damage in metal forming processes, 2nd Materials Chain International Conference (MCIC), Bochum, 12. - 14. November 2018

Ostwald, R.; Kuhl, E.; Menzel, A.: A computational framework for the simulation of regularised damage, Materials Science and Engineering (MSE) Congress, Darmstadt, 26. - 28. September 2018, Darmstadt University of Technology

Schneider, P.; Kienzler, R.: Modeling of Reisner-type Plate Theory to Monoclinic Material. Book of proceedings. 21st International Conference on Composite Structures. Bologna, 04. - 07- September 2018, 18 (2018)

Ostwald, R., Kuhl, E.; Menzel, A.: Implementation of a gradient-enhanced damage model – a heat equation-based framework, 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) – ECCM 6, Glasgow, 11. - 15. Juni 2018

Zeißig, M.; Jablonski, F.; Kienzler, R.: Beschreibung des Einflusses prozessbedingter Poren auf die mechanischen Eigenschaften von SLM-Proben, 50. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, Paderborn, 20. - 21. Februar 2018

Schneider, P.; Kienzler, R.: Modelling of Anisotropic Boundary Layer Effects in Plate Theories. Proc. Appl. Math. Mech. 18 (1). https://doi.org/10.1002/pamm.201800397

Schröder, R.; Bitykov, V.; Kienzler, R.: Simulation and Evaluation of Different Metal-Fibre-Transition Structures. Science-Report of the Research Unit “Schwarz-Silber” (FOR 1224). Faser-Institut Bremen e. V. (2018) 99-127

Ostwald, R.; Schulte, R.; Sprave, L.; Menzel, A.: Towards the simulation of complex metal forming processes: combination of regularised damage and contact, Vierte Sitzung der Arbeitsgruppe Simulation des Arbeitskreises Bruchmechanik und Bauteilsicherheit des Deutschen Verbandes für Materialforschung und -prüfung e.V. (DVM), Institute of Forming Technology and Lightweight Components (IUL), TU Dortmund

Onken, A.-K.; Wilhelmi, P.; Rückert, P.; Tracht, K.; Kuhfuß, B. : Toleranzfeldaufweitung durch gezielte Kombination von Fügepartnern in der Mikroproduktion 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 259-266, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Schattmann, C.; Wilhelmi, P.; Schenck, C.; Kuhfuß, B.; Vollertsen, F. : Erhöhung der Taktrate bei der Herstellung von Zwischenformen im Linienverbund8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 227-236, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Rippel, D.; Moumi, E.; Lütjen, M.; Schenck, C.; Freitag, M.; Kuhfuß, B. :Charakterisierung der Einflüsse einzelner Prozessparameter auf die Werkstückgeometrie beim Einstechrundkneten im Mikrobereich 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 219-226, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Toenjes, S.; Ishkina, S.; von Hehl, A.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B. : Untersuchung der inneren Struktur von exzentrisch rundgekneteten Bauteilen aus X5CrNi18-10 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 107-112, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Ishkina, S.; Schenck, C.; Kuhfuß, B. : Konditionierung von Halbzeugen durch Mikrorundkneten 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 99-101, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfuß B. : Einfluss von Fertigungsparametern auf geometrische Merkmale rundgekneteter Mikrobauteile 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 83-90, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6

Ishkina, S.; Schenck; C.; Kuhfuß, B.; Moumi, E.; Tobeck, K. Eccentric Rotary Swaging International Journal of Precision Engineering and Manufacturing, July 2017, Volume 18, Issue 7, pp 1035–1041 https://link.springer.com/article/10.1007/s12541-017-0122-4

Leu, A.; Razavi, M.; Langstädtler, L.; Ristic-Durrant, D.; Raffel, H.; Schenck, C.; Gräser, A.; Kuhfuß, B. :  Robotic green asparagus selective harvesting IEEE/ASME Transactions on Mechatronics, Volume 22, Issue 6, 2017, S. 2401-2410, DOI: 10.1109/TMECH.2017.2735861, Print ISSN: 1083-4435, Online ISSN 1941-014X http://ieeexplore.ieee.org/search/searchresult.jsp?newsearch=true&queryText=Robotic%20green%20asparagus%20selective%20harvesting

Herrmann, M.; Schenck, C.; Kuhfuß, B. :  Graded structured tools for dry rotary swaging 6th International Conference on Manufacturing Engineering, 5-6 October, 2017, Thessaloniki, Greece

Almohallami, A.; Arghavani, M.; Böhmermann, F.; Freiße, H.; Herrmann, M.; Mousav, S.A.; Schöler, S.; Scholz, P.; Tenner, J.;  Teller, M.;  Umlauf, G.;  Wulf, D.;  Yilkiran, D.;  Maier, H.J. :  How dry is dry? - A critical analysis of surface conditions used in dry metal forming Dry Met. Forming OAJ FMT 3 (2017) 090-094 http://www.drymetalforming.de/

Wilhelmi, P.; Schenck, C.; Kuhfuß, B. : Handling in the Production of Wire-Based Linked Micro Parts Micromachines 2017, 8(6) (2017) 169; doi:10.3390/mi8060169, Verlag MDPI, Basel http://www.mdpi.com/2072-666X/8/6/169

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B. : Plastic Deformation History In Infeed Rotary Swaging Process The 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), 26th-28th April 2017, Dublin/Ireland

Herrmann, M.; Liu, Y.; Schenck, C.; Kuhfuß, B.; Ohlsen, I. : Evolution of Heat In Dry Rotary Swaging The 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), 26th-28th April 2017, Dublin/Ireland

Wilhelmi, P.; Schenck, C.; Kuhfuß, B. : Linked Micro Parts Referencing System Journal of Mechanics Engineering and Automation 7 (2017), S. 44-49 doi: 10.17265/2159-5275/2017.01.006

Böhmermann, F.; Herrmann, M.; Riemer, O.; Kuhfuß, B. : Abrasive Particle Generation in Dry Rotary Swaging Dry Metal Forming Open Access Journal OAJ FMT 1 (2017) S. 001-006

Rückert, Patrick & Wohlfromm, Laura & Tracht, Kirsten. (2018). Implementation of virtual reality systems for simulation of human-robot collaboration. Procedia Manufacturing. 19. 164-170. 10.1016/j.promfg.2018.01.023.

Rückert, P.; Onken, A.-K.; Tracht, K.:Beschädigungsfreies Speichern von Teileverbunden in der Mikroproduktion. In: Vollertsen, F.; Hopmann, C.; Schulze, V.; Wulfsberg, J. (Eds.): 8. Kolloquium Mikroproduktion. BIAS Verlag, Bremen (2017).

Rückert, P.; Adam, J.; Papenberg, B.; Paulus, H.; Tracht, K.: Assistenzsysteme zur kollaborativen Montage - Mensch-Roboter-Assistenzsysteme basierend auf Bildverarbeitung und Sprachsteuerung. wt Werkstattstechnik online, 9 (2017)

Onken, A.-K.; Wilhelmi, P.; Rückert, P.; Tracht, K.; Kuhfuss, B.: Toleranzfeldaufweitung durch gezielte Kombination von Fügepartnern in der Mikroproduktion. 8. Kolloquium Mikroproduktion, eds.: Vollertsen, F.; Hopmann, C.; Schulze, V.; Wulfsberg, J.. BIAS Verlag, Bremen (2017).

Onken, A.-K.; Meiners, F.; Tracht, K.: Spare parts for selectively assembled linked parts in micro production. Procedia Manufacturing 19, (2018) 82-86 .

Onken, A.-K.; Rückert, P.; Perl, C.; Tracht, K.: Joining Linked Micro Formed Parts through Tolerance Field Widening and Synchronization. In: Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter. Hrsg: T. Schüppstuhl, J. Franke, K. Tracht,  Springer-Verlag Berlin (2017).

Meiners, F.; Hogreve, S.; Tracht, K.: Boundary Conditions in Handling of Microspheres Induced by Shape Deviation Constraints. In: Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter. Hrsg: T. Schüppstuhl, J. Franke, K. Tracht,  Springer-Verlag Berlin (2017).

Bader, A.; Lorenz, J.; Tracht, K.: Logistische Steuerung für Hochdurchsatzsysteme: Struktur einer Belegungsplanung für strukturell dynamische Hochdurchsatzsysteme. wt-online, 11/12 (2017) 847-851.

Bader, A.; Gebert, K.; Hogreve, S.; Tracht, K.: Derivative Products Supporting Product Development and Design for Assembly. Procedia Manufacturing, 19 (2018) 143–147.
DOI: 10.1016/j.promfg.2018.01.020.

Kienzler, R. (Ed.): Defect and Material Mechanics. Springer

Schneider, P.; Kienzler, R.: A Reissner-type Plate Theory for Monoclinic Material Derived by Extending the Uniform Approximation Technique by Orthogonal Tensor Decompositiones of nth-order gradients. Meccanica, 52 (2017), 2143-2167. https://doi.org/10.1007/s11012-016-0573-1

Kienzler, R.; Schneider, P.: Second-order Linear Plate Theories: Partial Differential Equations, Stress Resultants and Displacements. International Journal of Solids and Structures, 115-116 (2017), 14-26. https://doi.org/10.1016/j.ijsolstr.2017.01.004

Kienzler, R.; Schneider, P.: Beams in Plane Bending. Shell Structures: Theory and Applications, 4 (2017), 541-544, CRC Press. https://doi.org/10.1201/9781315166605

Ishkina, S.; Schenck, C.; Kuhfuß, B.;Moumi, E.;Tobeck, K. : Eccentric Rotary Swaging International Symposium on Green Manufacturing and Applications (ISGMA 2016) International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 7, pp. 1035-1041 DOI: 10, 1007/Is12541-017-0122-4 ISSN2234-7593 (Print)/2005-4602 (online) http://rdcu.be/tYsw

Langstädtler, L. : Electromagnetic embossing and forming of optical microstructures  I2FG workshop on impulse metalworking, 2nd December 2016, Nantes

Langstädtler, L.; Schönemann, L.; Schenck, C.; Kuhfuß, B. : Sequenced electromagnetic embossing and forming of optical microstructures EUSPEN Special Interest Group Meeting Structured and Freeform Surfaces Meeting, 9th-10th November 2016, DTU Copenhagen

Herrmann, M.; Moumi, E.; Ishkina, S.; Schenck, C.; Liu, Y.; Kuhfuß, B. : Werkstofffluss beim Rundkneten 23. Sächsische Fachtagung Umformtechnik Professur Formgebende Fertigungsverfahren (SFU 2016) Technische Universität Dresden, 7./8. Dezember 2016, Dresden

Wilhelmi, P.; Schenck, C.; Kuhfuß, B. : Diameter adaptive guides for wire based linked micro parts Proceedings of the 11th Conference on Multi-Material Micro Manufacture (4M), Kgs. Lyngby, Denmark, September 13-15, 2016, ISBN 978-981-11-0749-8

Bloem, A.; Schenck, C.; Kuhfuß, B. : Dynamic behavior of ultra precision feed axis at increased velocities 7th HPC 2016 - CIRP Conference on High Performance Cutting, Proceedia CIRP 46 (2016) 456-459

Foremny, E.; Schenck, C.; Kuhfuß, B. : Coupling system for ultra precision machining Journal of Mechanics Engineering and Automation, USA, 2016, ISSN 2159-5275

Foremny, E.; Schenck, C.; Kuhfuß, B. : Dynamic behavior of an ultra precision spindle used in machining of optical components Procedia CIRP (2016), 30th May, 2016, S. 452-455 http://dx.doi.org/10.1016/j.procir.2016.04.039

Herrmann, M.; Böhmermann, F.; Hasselbruch, H. ; Kuhfuß, B.; Riemer, O.; Mehner, A.; Zoch, H.W. : Forming without lubricant - Functionalized tool surfaces for dry forming applications 14th Global Conference on Sustainable Manufactu-ring (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika

Cui, C.; Schulz, A.; Moumi, E.; Kuhfuß, B.; Böhmermann, F.; Riemer, O. :  Graded tool material for micro cold forming via a novel spray forming process 10th Tool Conference (Tool 2016), October 4th-7th, 2016, Bratislava/ Slovakia

Cui, C.; Schulz, A.; Moumi, A.; Kuhfuß, B.; Böhmermann, F.; Riemer, O. :  Co-spray-formed graded steel for micro rotary swaging tools International Journal of Mechatronics and Manufacturing Systems (IJMMS), 2016

Wilhelmi, P.; Foremny, E.; Bloem, A.; Schenck, C.; Kuhfuß, B. : High Speed Referencing System for Linked Micro Parts 11th International Conference on Micro Manufacturing (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 19)

Hasselbruch, H.; Herrmann, M.; Mehner, A.; Kuhfuß, B.; Zoch, H.W. :  Incremental dry forging - Interaction of W-DLC coatings and surface structures for rotary swaging tools 14th Global Conference on Sustainable Manufactu-ring (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika

Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfuß, B.; Grelak, F. :  Material Flow in Micro and Macro Rotary Swaging International Symposium on Green Manufacturing and Applications (ISGMA 2016), June 21st-25th, 2016, Bali, Indonesien

Bloem, A.; Schenck, C.; Kuhfuß, B. : Adaptive state-space model for ultra-precision feed axis 3^rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering (SysInt2016), June 13^th-15^th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000

Bloem, A.; Wilhelmi, P.; Schenck, C.; Kuhfuß, B. : 2D position sensor based on speckle correlation-experimental setup for high-speed measurements and in field tests 11th International Conference on Micro Manufactu-ring (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 17)

Langstädtler, L.; Schönemann, L.; Schenck, C.; Kuhfuß, B. :Electromagnetic embossing of optical micro structures ASME Journal of Micro- and Nano-Manufacturing June 2016, Volume 4, Issue 2

Foremny, E.; Schenck, C.; Kuhfuß, B. : Integrated ultrasonic driven balancer for ultra precision high speed machine tools 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering (SysInt 2016), June 13^th- 15^th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000

Weikert, F.; Tracht K.: STEP product model for micro formed linked parts. Production Engineering - Research and Development, Vol. 10, Nr. 3 (2016) 293-303.
 http://dx.doi.org/10.1007/s11740-016-0667-6

Schneider, D.; Tracht, K.; Meyer-Stender, M.; Mederer, M.: Customer stock in repairable item systems. Production Engineering - Research and Development, Vol. 10, Nr. 2 (2016) 209-216. DOI 10.1007/s11740-015-0654-3.

Schreiber, S.; Funke, L.; Tracht, K.:BERTHA - A Flexible Learning Factory for Manual Assembly. Procedia CIRP, 54 (2016) 119-123.

Onken, A.; Bader, A.; Tracht, K.: Logistical Control of Flexible Processes in High-throughput Systems by Order Release and Sequence Planning. Procedia CIRP 52, (2016) 245-250.

Kaczmarek, S.; Hogreve, S.; Greten, A.; Schröder, M.; Tracht, K.: Improving Design Efforts and Assembly Efficiency of Rotor Blade Carriers through Modularisation. Procedia CIRP, 50 (2016) 76-81. ISSN 2212-8271, http://dx.doi.org/10.1016/j.procir.2016.05.021.

Hogreve, S; Kaczmarek, S.: Den Fortschritt erkennen - Gesten- und Fortschrittserkennung in der manuellen Montage. handling, 9 (2016), 72–73.

Hogreve, S.; Kaczmarek, S.; Adam, J.; Franz, L.; Döllen, T.; Paulus, H.; Reinkemeyer, V.; Tracht, K.: Controlling and assisting manual assembly processes by automated progress and gesture recognition. Applied Mechanics and Materials 840 (2016) 50–57. 10.4028/ www.scientific.net/AMM.840.50.

Langstädtler, L. : Micro Applications of Electromagnetic Forming I2FG Workshop Electromagnetic pulse forming & joining 2015, Dortmund

Herrmann, M.; Hasselbruch, H.; Böhmermann, F.; Kuhfuß, B.; Zoch, H.W.; Mehner, A.; Riemer, O. :  Dry Rotary Swaging Dry Metal Forming Open Access Journal FMT 1 (2015), S. 96-102

Böhmermann, F.; Hasselbruch, H.; Herrmann, M.; Riemer, O.; Mehner, A.; Zoch, H.-W.; Kuhfuß, B. : Trockenrundkneten Funktionalisierte Werkzeugoberflächen für eine schmierstofffreie Prozessauslegung wt-online - Ausgabe 11/12-2015, S. 830-835 Springer Verlag http://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=84719

Ishkina, S.; Kuhfuß, B.; Schenck, C. : Beeinflussung der Kornstruktur und der Umformbarkeit des Drahtes durch angepasste Prozesskinematik beim Mikrorundkneten 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen

Wilhelmi, P.; Moumi, E.; Schenck, C.; Kuhfuß, B. :  Werkstofffluss beim Mikrorundkneten im Linienverbund 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen

Kuhfuß, B.; Moumi, E. : Erhöhung der Umformgeschwindigkeit beim Mikrorundkneten durch Einsatz von Zwischenelementen 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen

Riemer, O.; Schönemann, L.; Dörgeloh, T.; Beinhauer, A.; Foremny, E.; Brinksmeier, E.; Kuhfuß, B. :  Balancing concepts for high speed aerostatic spindles 30th ASPE Annual Meeting,  November 1-6, 2015, Austin, Texas/USA

Herrmann, M.; Kuhfuß. B.; Schenck, C. : Dry rotary swaging with structured tools 13th Global Conference on Sustainable Manufacturing (GCSM 2015), 16th-18th September, 2015,Ho Chi Minh City (Vietnam)

Li, L. : Instationary Modal Analysis for Impulse-Type Stimulated Structures Dissertation Dr.-Ing., Universität Bremen, 2015

Herrmann, M.; Schenck; C.; Kuhfuß, B. : FEM simulation of infeed rotary swaging with structured tools 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK

Ishkina, S.; Kuhfuß, B.; Schenck, C. : Influence of the relative rotational speed on component features in micro rotary swaging 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK

Langstädtler, L.; Schenck, C.; Kuhfuß, B. : Effective electromagnetic forces in thin sheet metal specimen 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK

Hasselbruch, H.; Herrmann, M.; Mehner, A.; Zoch, H.W.; Kuhfuß, B. : Development, characterization and testing of tungsten doped DLC coatings for dry rotary swaging 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK

Herrmann, M.; Kuhfuß, B.; Schenck, C. : Dry Rotary Swaging - Tube Forming 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria

Cui, C.; Schulz, A.; Moumi, E.; Kuhfuß, B.; Böhmermann, F.; Riemer, O. : Development of micro rotary swaging tools of graded tool steel via co-spray forming 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK

Schönemann, L. Preuß, W.; Brinksmeier, E.; Denkena, B.; Foremny, E.; Kuhfuß, B. : Ultrapräzise Hochgeschwindigkeitsbearbeitung Teil 1: Steigerung der Flächenleistung durch den Einsatz von Mehrfach-Werkzeugen und HSC-Spindeln wt Werkstattstechnik online  Jahrgang 105 (2015), H. 6, S. 366-370 http://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=83722

Schönemann, L.; Brinksmeier, E.; Riemer, O.; Sassi, N.; Krüger, R.; Denkena, B.; Bloem, A.; Kuhfuß, B. :  Ultrapräzise Hochgeschwindigkeitsbearbeitung Teil 2: Potentiale elektromagnetischer Linearführungen kombiniert mit modellbasierten Steuerungskonzepten wt Werkstattstechnik online Jahrgang 105 (2015), H. 7/8, S. 469-474 http://www.werkstattstechnik.de/wt/get_article.php?data[article_id]=83997

Böhmermann, F.; Hasselbruch, H.; Herrmann, M.; Riemer, O.; Mehner, A.; Zoch, H. W.; Kuhfuß, B. : Dry Rotary Swaging - Approaches for a Lubricant Free Process Design
International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 4, S. 325-331

Cui, C; Schulz, A.; Moumi, E.; Kuhfuß, B.; Böhmermann, F. :Graded tool steel for micro rotary swaging via co-spray forming 8th International  Conference and Exhibition on Design and Production of  Machines And Dies/Molds June 18 - 21, 2015, Kușadasi/ Türkei, Tagungsband S. 191-198

Kuhfuß, B.; Moumi, E.; Clausen, B.; Epp, J.; Köhler, B. :  Investigation of deformation induced martensitic transformation during incremental forming of 304 stainless steel wires 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria Key Eng. Mat. 651-653 (2015) 645-650, https://doi.org/10.4028/www.scientific.net/KEM.651-653.645

Langstädtler, L.; Schönemann, L.; Bloem, A.; Schenck, C.; Kuhfuß, B. : Replication of prismatic microstructures by electromagnetic embossing Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 219-222

Foremny, E.; Schenck, C.; Kuhfuß, B. : High precision coupling system Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 205-208

Bloem, A.; Schenck, C.; Kuhfuß, B. : 2D position sensor based on speckle correlation Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 541-544

Herrmann, M.; Hasselbruch, H.; Böhmermann, F.; Kuhfuß, B.; Zoch, H.W.; Mehner, A.; Riemer, O. : Potentials of Dry Rotary Swaging Dry Met. Forming Open Access Journal, FMT 1 (2015) S. 63-71 http://suche.suub.uni-bremen.de/peid=P00104220&LAN=DE&CID=&index=L&Hitnr=1

Ishkina, S.; Kuhfuß, B.; Schenck, C. : Grain size modification by micro rotary swaging 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria

Schneider, D.; Funke, L.; Tracht, K.: Logistische Steuerung von Hochdurchsatzprüfungen - Steuerung von Mikrobproben in einem System mit mehrere Prüfstationen, wt Werkstattstechnik online 105, 11/12 (2015) 818-823.

Schuh, P.; Schneider, D.; Funke, L.; Tracht, K..: Cost-optimal spare parts inventory planning for wind energy systems. Logistics Research Vol. 8, No. 1, Springer Berlin Heidelberg (2015), Doi: 10.1007/s12159-015-0122-7.

Kaczmarek, S.; Hogreve, S.; Tracht, K.: Progress Monitoring and Gesture Control in Manual Assembly Systems Using 3D-image Sensors. Procedia CIRP 37, 1–6 (2015). DOI: 10.1016/j.procir.2015.08.006.

Hogreve, S.; Teetz, P.; Tracht, K.: Form- und stoffschlüssiges Spannen von Mikrokugeln - Niedrigschmelzende Legierungen und schnell härtende Klebstoffe als Spannmittel in der Mikrotechnik. wt Werkstattstechnik online 105, 9 (2015) 633–639.

Tracht, K.; Funke, L; Schottmayer, M.: Online-control of assembly processes in paced production lines. CIRP Annals - Manufacturing Technology, 64 (2015), Heft 1, 395-398.

Funke, L.; Hogreve, S.: Autonomie in der Montage - Flexibilität in der Produktion variantenreicher Maschinen. handling, 7-8 (2015) 32–33.

Tracht, K; Funke, L.; Schneider, D.: Varying Repair Capacity in a Repairable Item System. Proceedia CIRP,  Vol. 17, (2014), 446-450.

Weikert, F.; Kröger, A.; Tracht, K.: Auslegung von Prozessketten der Mikroumformung für die Verwendung von Teileverbunden. wt Werkstattstechnik online 104, 11/12 (2014) 722 – 727.

Weikert, F.; Tracht, K.: Konstruktionsbaukasten für Leiterverbunde des Mikroumformens. Konstruktion, 3 (2014) 70 - 74.

Schuh, P.; Perl, C.; Tracht, K.: Integration of Operational Data into Maintenance Planning. In: Through-life Engineering Services: Motivation, Theory, and Practice. Hrsg.: Redding, L. und Roy, R., Springer (2015) 225-240.

Schuh, P.; Stern, H.; Tracht, K.: Integration of expert judgment into remaining useful lifetime prediction of components. Procedia CIRP, Vol. 22 (2014), 109-114.

Schuh, P.; Funke, L.; Tracht, K.: Cost optimal spare parts planning for wind energy systems. 7th International Scientific Symposium on Logistics, 4 - 5 Juni (2014) Köln, 7 - 24.

Fantoni, G.; Santochi, M.; Dini , G.; Tracht, K.; Scholz-Reiter, B.; Fleischer, J.; Lien, TK.; Seliger, G.; Reinhart, G.; Franke, J.; Hansen, H.N.; Verl, A.:
Grasping devices and methods in automated production processes. CIRP Annals - Manufacturing Technology 63, 2 (2014) 679–701. 10.1016/j.cirp.2014.05.006.

Hogreve, S.; Tracht, K.: Design and implementation of multiaxial force sensing gripper fingers. Production Engineering - Research and Development 8, 6 (2014) 765–772. 10.1007/s11740-014-0563-x.

Weikert, F.; Weyhause, J.; Tracht, K.; Moumi, E.; Kuhfuß, B.; Brüning, H.; Vollertsen, F.: Beurteilung von Linienverbunden der Mikroumformung  6. Kolloquium Mikroproduktion, ed.: R.Tutsch. Braunschweig, Deutschland (2013) B13 © Shaker Verlag Aachen 2013

Weikert, F.; Weyhausen, J.; Tracht, K.: Statistical Study for Micro Forming Technologies Used for Linked Parts Production 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV’13), eds.: M.F. Zaeh. Munich, Germany (2013) 41 – 46 DOI: 10.1007/978-3-319-02054-9_8, © Springer International Publishing Switzerland 2014

Tracht, K.; Weikert, F.: Definition eines STEP-Modells für Leiterverbunde der Mikroumformtechnik. wt Werkstattstechnik online 103, 10 (2013) 802 – 806

Tracht, K; Hollmann, T; Wessa, T.; Schneider, D.; Schuh, P.: Consideration of Sustainability in Order Policies for Spare Parts. IEEE, ICRERA - 2 nd International Conference on Renewable Energy Research and Applications, Madrid, Spanien (2013).

Tracht, K.; von der Hagen, F.; Schneider, D.: Applied Repairable-Item Inventory Modeling in the Aviation Industry. Proceedia CIRP, Vol. 11, (2013) 334 - 339

Tracht, K.; Goch, G.; Schuh, P.; Westerkamp, J.F.; Sorg, M.: Failure Probability Prediction based on Condition Monitoring Data of Wind Energy Systems for Spare Parts Supply. In. CIRP - Annals Manufacturing Technology, Vol. 62, Issue 1 (2013) 127–130

Tracht, K; Schuh, P.: Rechnen statt nur horten. Logistik Heute, Jahrgang 35, Heft 9 (2013) 26 - 27

Tracht, K.; Westerholt, J.; Schuh, P.: Spare Parts Planning for Offshore Wind Turbines subject to Restrictive Maintenance Conditions. 46th International Conference on Manufacturing Systems (CMS2013), eds.: P.F. Cunha, K. Ueda, J. Vancza, J.C. Caldeira Portugal (2013) 563 - 568 http://dx.doi.org/10.1016/j.procir.2013.06.033

Tracht, K.; Hogreve, S.; Milczarek, A.M.; Skotartzak, T.; Eilts, T.: Mehrachsige Kraftsensorik in Greiffingern - Vergleich von Gestaltungsansätzen und Konzept zur Kraftregelung mit Standardgreifern. wt Werkstattstechnik online 103, 9 (2013) 712–716.

Funke, L; Rottler, R; Tracht, K: Rationalisierung in der Herstellung kundenspezifischer Zwischenprodukte, Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 108 (2013), Heft 11, 869 - 871

Tracht, K.; Funke, L.: Resource Allocation in the Paced Assembly of Customer Specific Goods. Azevedo, A. (Hrsg.): Advances in Sustainable and Competitive Manufacturing Systems - 23rd International Conference on Flexible Automation and Intelligent Manufacturing. Springer, Heidelberg New York Dordrecht London, 2013, S. 1103-1116.

Tracht, K.; Funke, L.: Ressourcenallokation in der manuellen Montage - Leistungsbestimmung getakteter Montagelinien in der Herstellung großvolumiger Baugruppen. wt online, 102 (2012), Heft 9, 564-567.

Tracht, K.; Weikert, F.; Hanke, T.: Suitability of the ISO 10303-207 Standard for Product Modeling of Line Linked Micro Parts. Procedia CIRP  3 (2012), 358-363

Tracht, K.; Weikert, F.; Scholz-Reiter, B.; Rippel, D.: Produktdatenmanagement in interdisziplinären Forschungsvorhaben. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 107, 11 (2012), 836 - 839

Tracht, K.; Weikert, F.:Handling of Micro Parts In: Micro Metal Forming. ed.: F. Vollertsen, Springer-Verlag Berlin Heidelberg (2013) 331-342

Tracht, K.; Weikert, F.; Hanke, T.:Suitability of the ISO 10303-207 Standard for Product Modeling of Line Linked Micro Parts. 45th International Conference on Manufacturing Systems (ICMS 12), eds.: G. Chryssolouris, D. Mourtzis Athens (2012) 406 - 413

Tracht, K.; Schneider, D.: Impact of Parameter Estimation Inaccuracies on a Repairable Item System. In: Re-engineering Manufacturing Sustainability. 20th CIRP Conference on Life Cycle Engineering (LCE13), eds: Nee, A.; Song, B.; Ong Springer Heidelberg (2013) 309-313

Tracht, K.; Mederer, M.; Schneider, D.: Impact of Parameter Changes in a Service Provider Closed-Loop Supply Chain with Customer-Owned Stock. In: Leveraging Technology for a Sustainable World. 19th CIRP Conference on Life Cycle Engineering (LCE12), eds.: Dornfeld, D., Linke, B. Springer Heidelberg (2012)  593-598

Tracht, K.; Schneider, D.; Schuh, P.: Ersatzteilversorgung hochwertiger Industriegüter. Schriftenreihe Wirtschaft & Logistik - Tagungsband. 29. Logistik-Kongress und EUROLOG (2013) 159 - 184

Tracht, K.; Schuh, P.: Multi Criteria Decision Making for Maintenance Planning of Wind Turbines. 1st International Conference on Through-life Engineering Services (TesConf 12), Shrivenham (2012) 175 - 181

Tracht, K.; Maier, J.; Schuh, P.: Stochastische Einflüsse auf die Instandhaltung von Windenergieanlagen. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 107, 01/02 (2012) 99 - 103.

Tracht, K.; Niestegge, A.; Schuh, P.: Demand Planning based on Performance Measurement Systems in Closed Loop Supply Chains. In. Procedia CIRP, Vol. 12 (2013) 324 - 329, http://dx.doi.org/10.1016/j.procir.2013.09.056

Tracht, K.; Kuhfuss, B.; Brinksmeier, E.; Busse, M.; Kroll, L.; Hogreve, S.; Garbrecht, M.; Lehmhus, D.; Heinrich, M.; Bosse, S.: Enabling the factories of the future: The role of smart systems in manufacturing and robotics. Smart Systems Integration Conference 2012, Zurich, Switzerland 21-22 March 2012 (SSI 2012) (2012).

Tracht, K.; Hogreve, S.; Bosse, S.: Interpretation of multiaxial gripper force sensors. Technologies and Systems for Assembly Quality, Productivity and Customization - Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems (CATS 2012) ed.: S. Jack Hu. University of Michigan Ann Arbor (2012) 39–42.

Bosse, S.; Hogreve, S.; Tracht, K.: Design of a Mechanical Gripper with an Integrated Smart Sensor Network for Multi-Axial Force Sensing and Perception of Environment. Proceedings of the Smart Systems Integration Conference 2012 (SSI 2012). VDE Verlag Berlin Offenbach (2012).

Tracht, K.; Funke, L.; Zeitzmann, J.: Vorgehen zur Effizienzsteigerung in KMU. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 106 (2011), Heft 3, 153-156.

Tracht, K.; Funke, L.; Joppien, T.: Decentralised Resource Allocation in Paced Assembly Processes.  Spath, D.; Ilg, R.; Krause, T. (Eds.): Proceedings of the 21st International Conference on Production Research (ICPR21), Fraunhofer Verlag, Stuttgart, 2011, CD-Rom.

Tracht, K.; Funke, L.: Auftragsorientierte Schichtplanung in der Montage - Optimierung des Personaleinsatzes in der getakteten Fließmontage großvolumiger Bauteile. wt online, 101 (2011), Heft 9, 591-594.

Kuhfuß, B.; Moumi, E.; Tracht, K.; Weikert, F.; Vollertsen, F.; Stephen, A.: Process Chains In Microforming Technology Using Scaling Effects. 14th International ESAFORM Conference on Material Forming (ESAFORM 14), eds.: G. Menary Belfast (2011) 535 – 540.

Tracht, K.; Weikert, F.; Hanke, T.; Kuhfuß, B.; Hellwig, C.: Modellierung von Teileverbunden des Mikroumformens. wt Werkstattstechnik online 101, 11/12 (2011), 765 – 769

Tracht, K.; Weikert, F.; Kuhfuß, B.; Hellwig, C.; Schenck, C.: Technologische und datentechnische Vernetzung von Fertigungseinrichtungen der Mikroumformung. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, eds.: O. Kraft, A. Haug, F. Vollertsen, S. Büttgenbach. Karlsruhe (2011) 133 – 138

Tracht, K.; Mederer, M.; Schneider, D.: Source Selection for Spare Parts Supply. 44th CIRP International Conference on Manufacturing Systems (ICMS 11), ed. Duffie, N., Madison, WI, USA (2011)

Tracht, K.; Mederer, M.; Schneider, D.: Effects of Lateral Transshipments in Multi-Echelon Closed-Loop Supply Chains. In: Glocalized Solutions for Sustainability in Manufacturing, 18th CIRP International Conference on Life Cycle Engineering (LCE11), ed. Hesselbach, J.; Herrmann, C. Springer Heidelberg (2011) 443-447

Schuh, P.; Tracht, K.; Westerkamp F. J.; Sorg, M.; Bredemeier, C.; Goch, G.: Zustandsorientierte Instandhaltung von Windenergieanlagen. 6. VDI-Fachtagung Schwingungsüberwachung VDI Berichte 2151, Leonberg (2011) 33 - 45

Tracht, K.; Kouamo, S. T.: Optimierung der Instandhaltungsplanung von Onshore-Windenergieanlagen. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 106, 01/02 (2011) 75 – 79

Tracht, K.; Hogreve, S.; Borchers, F.: Gripper with Integrated Three-Dimensional Force Detection. In:Enabling Manufacturing Competitiveness and Economic Sustainability. Ed.: ElMaraghy, H. A., Springer Heidelberg, Dordrecht, London, New York (2012) 364–369. 10.1007/978-3-642-23860-4_60.

Tracht, K.; Hogreve, S.: Decision Making During Construction and Reconfiguration of Modular Assembly Lines. In: Enabling Manufacturing Competitiveness and Economic Sustainability. Ed.: ElMaraghy, H. A., Springer Heidelberg, Dordrecht, London, New York (2012) 105–110. 10.1007/978-3-642-23860-4_17.

Tracht, K.; Weikert, F.; Funke, L.: Change Management as an Enabler of Employee Knowledge Integration into the Design of Planning Procedures. ElMaraghy, H. A. (Ed.): Enabling Manufacturing Competitiveness and Economic Sustainability, Springer, Heidelberg Dordrecht London New York, 2012, 346-351.

Tracht, K.; Funke, L.; Weikert, F.: Influence of the European Emissions Trading Scheme on MRO Provider of the Civil Aviation Industry. 4th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 11), eds.: H. El Maraghy Montreal (2011) 499 – 504

Tracht, K.; Funke, L.: A Stimulus-Response-Approach for Assembly Line Planning. 7'th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME 10),  23.-25. June 2010, Capri, Italy.

Tracht, K.; Schenck, C.; Weikert, F.; Kuhfuß, B.: Förderung mikrokaltungeformter Bauteile im Verbund. wt Werkstattstechnik online 100, 11/12 (2010) 864 – 868

Tracht, K.; Schuh, P.; Weikert, F.: Seasonal Demand on the Array of Spare Parts in the Aviation Industry. 43th International Conference on Manufacturing Systems (ICMS 10), eds.: G. Sihn; P. Kuhlang Vienna (2010) 1093 – 1100

Tracht, K.; Mederer, M.; Schneider, D.; Queueing of Seasonally Demanded Spare Parts in a Repair Shop of a Closed-Loop Supply Chain. In: Advances in Sustainable Manufacturing, Global Conference on Sustainable Manufacturing (GSCM 10), ed: Seliger, G.; Khraisheh, M.; Jawahir, I.S. Springer Heidelberg (2010)  371-376

Tracht, K.; Schneider, D. ; Schuh, P.: A feedback control system for spare parts logistic networks in the field of civil aviation. 7th  CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME10), Capri, Italien

Tracht, K.; Wrehde, J.; Seuguep Kouamo, T.: Optimization of the material flow using the principles of the Toyota Production System. 43th International Conference on Manufacturing Systems (ICMS 10), eds.: G. Sihn; P. Kuhlang Vienna (2010) 488 – 495

Kuhfuß, B.; Allers, S.; Schädlich, S.:Sensor- und Aktorintegration in rotierende Werkzeuge 6. Paderborner Workshop "Entwurf mechatronischer Systeme“, 02./03.04.2009, Paderborn

Kuhfuß, B.; Piwek, V.; Moumi, E.: Manufacturing of micro components by means of plunge rotary swaging 9th International euspen Conference, June 2nd-June 5th, 2009, San Sebastian/Spanien

Kuhfuß, B.; Allers, S.: Sensing tool for condition monitoring 9^th International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), 30^th June-2^nd July 2009, Brunel University, Teddington/UK

Kuhfuß, B.; Piwek, V.; Moumi, E.: Vergleich charakteristischer Einflussgrößen beim Mikro- und Makrorundkneten 4. Kolloquium "Mikroproduktion“, 28.-29.10.2009, Bremen

Kuhfuß, B.; Backe, P. : Development and Mechanical Design of a Mobile Robot-Assisted Gait Rehabilitation System 31th Colloquium of Automation, 5th-6th November 2009, Leer

Kuhfuß, B.; Allers, S.: Autonomic harvesting system for white asparagus: motion mechanism and control 31th Colloquium of Automation, 5th-6th November 2009, Leer

Kuhfuß, B.; Backe, P.:  Conception of a mobile processing unit in production engineering 31th Colloquium of Automation, 5th-6th November 2009, Leer

Kuhfuß, B.; Piwek, V.; Kampf, K.; Orlik, T.; Schumacher, W.: Entwicklung einer Hochgeschwindigkeitswickelmaschine und Ansätze zur weiteren Optimierung SPS/IPC/Drives Elektrische Automatisierung-Systeme und Komponenten- Fachmesse & Kongress, 24.-26.11.2009, Nürnberg

Kuhfuß, B.; Schenck, C.: Einsatzmöglichkeiten von Hybridkinematiken für die Hochgeschwindigkeitsbearbeitung von Großbauteilen Buch Fertigungsmaschinen mit Parallelkinematiken- Forschung in Deutschland-, Hrsg. U. Heisel, H. Weule, S. 409-430, Shaker-Verlag, Aachen, ISBN 978-3-8322-7203-6, Juni 2008

Schenck, C.: Einsatz bewegungsredundanter Hybridkinematiken für die Hochgeschwindigkeitsfräsbearbeitung´Dissertation Dr.-Ing., Universität Bremen, April 2008 Shaker-Verlag, Aachen, ISBN 978-3-8322-7475-7

Kuhfuß, B.; Allers, S.: Mechatronic reamer with wireless control 10th euspen International Conference, May 18^th-May 22^nd, 2008, Zürich, Tagungsband S. 175-178, Hrsg. /Verlag european society for precision engineering and nanotechnology

Kuhfuß, B.; Amirian, G.; Schenck, C.:

Contour Error in Parallel Kinematics Machining by Tracking Error 13^th International Conference on Machine Design and Production (UMTIK 2008), September 3^rd-5^th, 2008, Istanbul, Türkei

Kuhfuß, B.; Allers, S.: Mechatronische Reibahle zur Verschleißkompensation mit Bluetooth-Interface 10. Wireless Technologies Kongress, 23.-24.09.08, Stuttgart, Tagungsband S. 176-183, Hrsg. Prof. Dr. J. Wollert, Akademische Verlagsgesellschaft Aka GmbH, Heidelberg

Kuhfuß, B.; Moumi, E.: Influence of the Feedrate on Work Quality in Micro Rotary Swaging 3rd International Conference on Micromanufacturing (ICOMM 2008), September
9^th - 11^th, 2008, Carnegie Mellon/USA, Tagungsband S. 86-91

Kuhfuß, B.; Moumi, E.; Piwek, V.: Micro rotary swaging: process limitations and attempts to their extension Microsystem Technologies online, Springer-Verlag Berlin/Heidelberg, April 2008, ISSN 0946-7076 (Print) 1432-1858 (Online)

Kuhfuß, B.; Schenck, C.; Amirian, G.: Influence of Tracking Error on the Contouring Accuracy in Parallel Kinematics Machining 2^nd International Conference on Computing and Solutions in Manufacturing Engineering (CoSME’08), September 25^th - 27^th 2008, Brasov/Romania

Kuhfuß, B. Maass, P.; Riemer, O.: Mathematical models for surface characterization of machining processes Microsystem Technologies online, Springer-Verlag Berlin/Heidelberg, August 2008, ISSN 0946-7076 (Print) 1432-1858 (Online)

Kuhfuß, B.; Piwek, V.; Kaupisch, T.; Werschbowski, A.: Bedeutung numerischer Verfahren für die Simulation von Produktionsprozessen Tag des SE 2008, Gesellschaft für Systems Engineering e.V. (GfSE), 13.-14.11.2008, Bremen

Kuhfuß, B.; Orlik, B.; Schädlich, S.; Groke, H.:Wavelet basiertes Echtzeitsystem zur Überwachung von Prozess- und Maschinenzustandsänderungen Tagungsband der SPS/IPC/Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 25.-27.11.2008, Nürnberg, Tagungsband S. 131-139, Hrsg. Verl. A.; Schumacher, W.; Bender, K. VDE-Verlag, Berlin, ISBN 978-3-8007-3128-2

Amirian, G.: Transformation of Tracking Error in Parallel Kinematic Machining Dissertation Dr.-Ing., Universität Bremen, November 2008

Kuhfuß, B.; Schenck, C.; Amirian, G. : Contour error in circular trajectory in parallel kinematic machining (PKM) Modern Technologies, Quality and Restructuring (TMCR 2007), Kishinev/Moldawien, May 31^st-June 3^rd, 2007, Tagungsband S. 21-27

Kuhfuß, B.; Wang, Y. : Pitting Detection with Model-Generated Wavelet Analysis for Condition Monitoring of Linear Guide Ways Modern Technologies, Quality and Restructuring (TMCR 2007), Kishinev/Moldawien, May 31^st-June 3^rd, 2007, Tagungsband S. 28-33

Kuhfuß, B.; Piwek, V. : Kreuzwickeln unter der Lupe C2 Deutschland Coating & Converting, Ausgabe 2 Februar/März 07, S. 63-65, Verlag nimble shows & media GmbH, Oberaudorf

Kuhfuß, B.; Backe, P.  Goch, G.; Kruse, D.: Photothermal inspection of free-form surfaces by high-precision multi-DOF positioning 7th euspen International Conference, May 20th – May 24th, 2007, Bremen, Tagungsband S. 306-309

Kuhfuß, B. Goch, G.; Allers, S.; Stoebener, D.; Dijkman, M.: In-process control of cutting depth during turning SICE Annual Conference 2007, International Conference on Instrumentation, Control and Information Technology, Japan

Kuhfuß, B.; Piwek, V.; Moumi, E.:  Mikrorundkneten – Verfahrensgrenzen und Ansätze zu deren Erweiterung DFG-Kolloquium Mikroproduktion 22.11-23.11.07, Karlsruhe

Kuhfuß, B.; Schenck, C. : Productivity increase in aircraft component machining by hybrid kinematic structures APT'07 International Conference on Applied Production Technology, 17.09.-19.09.07, Bremen

Kuhfuß, B.; Schädlich, S.: Layer detection in orbital drilling of composites by advanced process monitoring APT'07 International Conference on Applied Production Technology, 17.09.-19.09.07, Bremen

Kuhfuß, B.; Piwek, V.: Productivity increase of rotary swaging by optimized machine concepts 2nd ICNFT International Conference on New Forming Technology, 20.09.-21.09.07, Bremen

Kuhfuß, B.; Piwek, V.; Allers, S.: Feed drives - Synchronized Motion is leading to a process optimization 52^nd IWK-Internationales Wissenschaftliches Kolloquium, Technische Universität Ilmenau, 10.09.-13.09.07

Kuhfuss, B.; Amirian, G.; Schenck, C.:Comparison of radial deviation in serial and parallel kinematic machining 3rd Tehran International Conference on Manufacturing Engineering (TICME 2007), December 10-12, 2007, Teheran (Iran)

Kuhfuss, B.; Maass, P.; Riemer, O.: Mathematical models for tribological optimization of machining processes DFG-Kolloquium Mikroproduktion 22.11-23.11.07, Karlsruhe

Kuhfuß, B.; Schenck, C.: Diversion of tool paths in kinematic redundant machining: a general approach for different design requirementsWGP-Annals Production Engineering, Issue XIII/1, 2006, S. 197-202

Kuhfuß, B.; Backe, P. : Automatisierte 3D-Orientierung von Bauteilen mit gekrümmter Oberfläche zur photothermischen Randzonenuntersuchung13. ITG-/GMA Fachtagung Sensoren und Messsysteme 2006, Freiburg, Tagungsband Seite 185-188

Kuhfuß, B.; Schenck, C.; Allers, S.: Static Calibration of a Tripod by Neural Network Error Identification 5^th Parallel Kinematics Seminar, Parallel Kinematic Machines in Research and Practice, Chemnitz, April 25-26, 2006, Tagungsband S. 603-616

Kuhfuß, B.; Backe, P.: Einsatzmöglichkeit einer PI-Parallelkinematik in der industriellen Prüftechnik PI-News, Ausgabe 34, April 2006, Hrsg. Physik-Instrumente GmbH & Co. KG

Kuhfuß, B. : New Technologies and Machine Tool Development in Germany Joint AMT/NCMS Manufacturing Technology Forum, Fort Lauderdale, April 27-28, 2006

Piwek, V. : Verhalten und Optimierung eines direkt angetriebenen Vorschubsystems bei impulsförmiger Belastung Dissertation Dr.-Ing., Universität Bremen, Dezember 2006, Shaker-Verlag, Aachen, ISBN 978-3-8322-6148-1

Kuhfuß, B.,Piwek, V.: Maßnahmen und Einrichtung zur Erhöhung der Antriebssteifigkeit bei impulsförmiger Belastung. SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 22.-24.11.2005, Nürnberg, Tagungsband S. 548-557

Kuhfuß, B., Schädlich, S.: Schichterkennung beim Orbitalbohren von Verbundwerkstoffen. wt Werkstattstechnik online 6 (2004), S. 289, Springer-VDI-Verlag

Kuhfuß, B.; Schenck, C.: Estimated Process Time Savings by PKM and HKM Machining. 4th Chemnitz Parallel Kinematics Seminar, Development Methods and Application Experience of Parallel Kinematics, Chemnitz, April 20-21, 2004, Tagungsband S. 277-290

Kuhfuß, B.; Schenck, C.: Calculating the Trajectories for Geometric Redundant Machining. 1^st International Conference on Computing and Solutions in Manufacturing Engineering - CoSME'04, 16.-18. September 2004, Brasov, Romania

Kuhfuß, B., Schädlich, S.: Condition Monitoring with Process Adapted Wavelets. 1^st International Conference on Computing and Solutions in Manufacturing Engineering - CoSME'04, 16.-18. September 2004, Brasov, Romania

Kuhfuß, B.,Piwek, V.: Untersuchungen am Lineardirektantrieb zur Synchronisation der Vorschubbewegung auf die Werkzeugbewegung eines Bearbeitungsprozesses. SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 23.-25.11.2004, Nürnberg, Tagungsband S. 541-548

Kuhfuß, B.: Recent Development and Manufacture of Machine Tools in Germany, Keynote paper. 11^th International Machine Tool Engineers Conference (IMEC), 03. - 05.11.2004, Tokio/Japan

Schädlich, S.: Über das Potenzial prozessspezifischer Wavelets in der Prozessanalyse am Beispiel des dynamischen Verhaltens einer hydraulischen Maschinenkomponente. Diplomarbeit Universität Bremen FB04/FG05, 2003

Kuhfuß, B.:Studiengang Systems Engineering der Universität Bremen - ein neuer interdisziplinärer Ansatz. Systems Engineering Conference der GfSE, Hamburg 2002

Kuhfuß, B.: Ultradynamische Drehmaschine zur Unrundbearbeitung. SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, Nürnberg 26.-28.11.2002, Tagungsband S. 650-657

Kuhfuß, B., Schenck, C.: Optimized hybrid machine structures – a new development approach. 3^rd International Conference of Parallel Kinematics, Chemnitz, April 23-25, 2002, Tagungsband S. 213-226